C0045

TORQDEX // POWERTRAIN DTC

Left Rear Wheel Speed Sensor Circuit

The brake control module has detected a fault involving the left-rear wheel-speed sensor signal or circuit.

CODE FAMILY Chassis
SEVERITY HIGH
DRIVEABILITY VERIFY BEFORE DRIVING
COMMON AREA Left Rear Wheel Speed Sensor / Wiring

00 // CODE DEFINITION

What C0045 means

C0045 is commonly associated with the left-rear wheel-speed sensor circuit.

The sensor, wiring, encoder, bearing, connector, or brake control module input may be involved.

01 // COMMON SYMPTOMS

What you may notice

ABS warning light
Traction or stability-control warning
Possible abnormal ABS intervention

02 // COMMON CAUSES

What can trigger C0045?

SENSOR

Rear wheel-speed sensor fault

The sensor may be damaged or producing an unreliable signal.

WIRING

Rear sensor harness fault

Road debris, corrosion, or harness damage can interrupt the signal.

ENCODER

Encoder or bearing issue

A damaged tone ring, magnetic encoder, or wheel bearing can create erratic readings.

03 // DRIVEABILITY

Can I keep driving with C0045?

SEVERITY HIGH
VERIFY BEFORE DRIVING

Use caution. A high-severity fault can affect engine, transmission, electrical, or emissions-system operation. If the vehicle is running poorly, overheating, losing oil pressure, flashing the check-engine light, or entering reduced-power mode, avoid continued driving until the cause is diagnosed.

04 // DIAGNOSTIC ORDER

Start here

01

Review live wheel-speed data

Compare the left-rear signal with the other wheels.

02

Inspect sensor wiring

Check connectors and exposed harness sections for damage.

03

Inspect encoder condition

Look for contamination, damage, corrosion, or excessive bearing movement.

04

Verify circuit integrity

Test the sensor circuit using the correct procedure for the vehicle.

05 // COMMON REPAIR AREAS

Systems commonly involved

These are common areas associated with C0045. Testing should confirm the actual fault before parts are replaced.

SENSOR

Rear wheel-speed sensor fault

The sensor may be damaged or producing an unreliable signal.

WIRING

Rear sensor harness fault

Road debris, corrosion, or harness damage can interrupt the signal.

ENCODER

Encoder or bearing issue

A damaged tone ring, magnetic encoder, or wheel bearing can create erratic readings.

06 // DIAGNOSTIC PRINCIPLE

Confirm the fault before replacing parts

C0045 identifies a condition detected by the vehicle control system. It does not automatically identify one failed component. Test the affected system before replacing parts.

07 // RELATED TORQDEX DIAGNOSTICS

Related diagnostic guides

Continue troubleshooting by symptom and system. These TorqDex guides cover common diagnostic paths associated with this trouble code.