P0306

TORQDEX // POWERTRAIN DTC

Cylinder 6 Misfire Detected

Misfire activity has been detected repeatedly on cylinder 6.

CODE FAMILY Powertrain
SEVERITY HIGH
DRIVEABILITY DRIVEABILITY MAY BE LIMITED
COMMON AREA Cylinder 6 / Ignition / Fuel / Mechanical

00 // CODE DEFINITION

What P0306 means

P0306 identifies a combustion problem associated with cylinder 6.

Ignition faults, injector problems, compression loss, wiring, or air leaks may be responsible.

01 // COMMON SYMPTOMS

What you may notice

Rough idle
Engine shaking
Hesitation
Reduced power
Flashing check-engine light

02 // COMMON CAUSES

What can trigger P0306?

IGNITION

Ignition fault

A weak coil, worn spark plug, wire fault, or connection issue may cause the misfire.

FUEL

Fuel injector problem

Cylinder 6 may have restricted or incorrect fuel delivery.

MECHANICAL

Mechanical fault

Low compression or valvetrain problems may affect combustion.

03 // DRIVEABILITY

Can I keep driving with P0306?

SEVERITY HIGH
DRIVEABILITY MAY BE LIMITED

Driving may be possible if the misfire is mild, but avoid continued driving if the check-engine light is flashing, the engine is shaking heavily, or power is significantly reduced. An active misfire can damage the catalytic converter.

04 // DIAGNOSTIC ORDER

Start here

01

Review misfire counters

Confirm cylinder 6 is the primary affected cylinder.

02

Inspect ignition

Check the spark plug and coil or related components.

03

Test injector operation

Verify injector command and fuel delivery.

04

Check compression

Compare cylinder 6 with neighboring cylinders.

05 // COMMON REPAIR AREAS

Systems commonly involved

These are common areas associated with P0306. Testing should confirm the actual fault before parts are replaced.

IGNITION

Ignition fault

A weak coil, worn spark plug, wire fault, or connection issue may cause the misfire.

FUEL

Fuel injector problem

Cylinder 6 may have restricted or incorrect fuel delivery.

MECHANICAL

Mechanical fault

Low compression or valvetrain problems may affect combustion.

06 // DIAGNOSTIC PRINCIPLE

Confirm the fault before replacing parts

P0306 identifies a condition detected by the vehicle control system. It does not automatically identify one failed component. Test the affected system before replacing parts.

07 // RELATED TORQDEX DIAGNOSTICS

Related diagnostic guides

Continue troubleshooting by symptom and system. These TorqDex guides cover common diagnostic paths associated with this trouble code.