P0302

TORQDEX // POWERTRAIN DTC

Cylinder 2 Misfire Detected

Misfire activity has been detected repeatedly on cylinder 2.

CODE FAMILY Powertrain
SEVERITY HIGH
DRIVEABILITY DRIVEABILITY MAY BE LIMITED
COMMON AREA Cylinder 2 / Ignition / Fuel / Mechanical

00 // CODE DEFINITION

What P0302 means

P0302 identifies abnormal combustion associated specifically with cylinder 2.

Ignition, injector, compression, intake, wiring, or mechanical problems may be responsible.

01 // COMMON SYMPTOMS

What you may notice

Rough idle
Engine vibration
Hesitation
Reduced power
Flashing check-engine light

02 // COMMON CAUSES

What can trigger P0302?

IGNITION

Spark fault

A plug, coil, wire, or connection may be preventing proper ignition.

FUEL

Injector problem

Cylinder 2 may have insufficient or inconsistent fuel delivery.

MECHANICAL

Compression loss

Valve, ring, gasket, or valvetrain problems may reduce cylinder contribution.

03 // DRIVEABILITY

Can I keep driving with P0302?

SEVERITY HIGH
DRIVEABILITY MAY BE LIMITED

Driving may be possible if the misfire is mild, but avoid continued driving if the check-engine light is flashing, the engine is shaking heavily, or power is significantly reduced. An active misfire can damage the catalytic converter.

04 // DIAGNOSTIC ORDER

Start here

01

Review cylinder misfire data

Confirm cylinder 2 is consistently accumulating misfire counts.

02

Inspect or swap ignition components

Determine whether the fault follows a plug or coil.

03

Evaluate the injector

Check electrical command and fuel delivery.

04

Test compression

Compare cylinder 2 with the other cylinders.

05 // COMMON REPAIR AREAS

Systems commonly involved

These are common areas associated with P0302. Testing should confirm the actual fault before parts are replaced.

IGNITION

Spark fault

A plug, coil, wire, or connection may be preventing proper ignition.

FUEL

Injector problem

Cylinder 2 may have insufficient or inconsistent fuel delivery.

MECHANICAL

Compression loss

Valve, ring, gasket, or valvetrain problems may reduce cylinder contribution.

06 // DIAGNOSTIC PRINCIPLE

Confirm the fault before replacing parts

P0302 identifies a condition detected by the vehicle control system. It does not automatically identify one failed component. Test the affected system before replacing parts.

07 // RELATED TORQDEX DIAGNOSTICS

Related diagnostic guides

Continue troubleshooting by symptom and system. These TorqDex guides cover common diagnostic paths associated with this trouble code.